Toro 10178SL Service Manual Groundsmaster 4300 D Preface Publication

Traction Circuit
The hydraulic traction circuit consists of a variable dis-
placementpistonpump(P5)connectedinaclosedloop,
parallel circuit to four (4) orbital  roller vane wheel mo-
tors. The traction pump input shaft is rotated by a drive
shaft that is driven from the engine flywheel.
Gear pump section (P3) supplies oil flow for the steering
circuit and also provides a constant supply of charge oil
to the closed loop  traction circuit. This charge oil pro-
videslubricationfortractioncircuitcomponentsandalso
replenishes traction circuit oil that is lost due to internal
leakage in the traction circuit.
Forward traction circuit pressure can be measured at a
test port located in the hydraulic tube that connects the
front wheel  motors. Reverse  traction circuit  pressure
can be measured at test ports in the AWD control man-
ifold.
Gear pump section (P3) takes its suction  from the hy-
draulicreservoir.Chargepumpflowisdirectedtothelow
pressure side of the closed loop traction circuit. Charge
relief valve (R5) located in the traction pump limits the
charge relief pressure to 200 PSI (14 bar).
Forward Direction (Fig. 10)
The piston pump is equipped with a case drain to allow
internal leakage  to be  removed from  the pump.  The
case drain is connected to the gear pump inlet.
Pushing the top of the traction pedal angles the traction
pump swash plate to create a flow of oil. This oil flow is
directed to the  wheel motors via hydraulic  hoses and
tubes to drive the wheels in the forward direction. Trac-
tion pump flow is directed to the front wheel motors and
thentotheopposite  rearwheelmotorstomaximizetrac-
tion. To reduce tire scuffing when turning, traction sys-
tem pressure is equalized in the AWD control manifold
with an orifice and a  bi--directional relief valve. Check
valves in the AWD manifold allow the rear wheel motors
toover--runduringtightturns.Forwardtractionpressure
is limited to 3625 PSI (250 bar) by the forward traction
relief valve (R3) located in the traction pump.
The piston  pump (P5)  includes a  flushing valve  that
bleeds off a small amount of hydraulic fluid for cooling
ofthe closed loop traction circuit. The charge system re-
plenishes oil that is bled from the traction circuit by the
flushing valve.
Reverse Direction
The traction circuit operates essentially the same in re-
verse as it does in the forward direction. However, the
flow through the circuit is reversed. Pushing the bottom
of the traction  pedal rotates the traction  pump swash
plate to create  a flow of oil.  This oil is directed  to the
wheel motors to drive the wheels in the reverse direc-
tion. Reverse traction  pressure is limited to  3625 PSI
Oil flowing from the wheel motors returns to the variable
displacement   pump  and   is   continuously   pumped
through the traction circuit as long as the traction pedal
is pushed.
(250
bar)bythereversetractionreliefvalve(R4)located
The angle of the swash plate determines pump flow and
ultimately traction speed. When the traction pedal is de-
pressedasmallamount,asmallswashplaterotationre-
sultsinlowpumpoutputandlowertractionspeed.When
the traction pedal is  depressed fully, the pump swash
plate rotates fully to provide maximum pump output and
traction speed.
in the traction pump.
Oil flowing from the wheel motors returns to the traction
pump and is continuously pumped through the  closed
loop  traction circuit  as  long as  the  traction pedal  is
pushed.
The charge circuit and flushing valve function the same
in reverse as they do in the forward direction.
Groundsmaster 4300--D
Page 4 -- 11
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 255 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website