11.
Remove the bearing from axle shaft.
12.Remove
13.Inspect
and discard the outer seal plate.
all components for wear and damage
(Fig. 13). Replace the axle shaft if the seal has grooved
the axle surface more that 1/64 inch (0.40 mm).
Figure 13
Figure 14
Figure 15
Assembly (Fig. 6)
1.
Coat a new outer seal plate with a thin film of oil and
place the outer seal plate, brake assembly and dust
shield in position on the axle shaft.
2.
Pack the bearing with grease and press it onto the
axle shaft (Fig. 14).
IMPORTANT: Drive the bearing onto the axle shaft
by pressing on the inner race of the bearing only.
3.
Slide a new bearing retainer on the axle shaft. Sup-
port the shaft and retainer in a suitable press and press
the bearing retainer firmly against the bearing (Fig. 15).
IMPORTANT: Do not heat the bearing retainer to
install. Heat will destroy the close tolerance press
fit.
Groundsmaster 3280−D/3320
Page 8 − 11
Drive Axles
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3280 D, Toro Groundsmaster 3320 |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |