Toro 05138SL Rev A Service Manual Groundsmaster 3280 D 3320 Preface Publication

17.Assemble
the lock pin. Drive the pin to the approxi-
mate center location of the pinion mate shaft. Peen the
metal of the case to lock the pin in place (Fig. 49).
Figure 49
Figure 50
Figure 51
18.Position
the ring gear onto the differential case and
thread new cap  screws into the ring gear.  Tighten the
screws, alternating back and forth across the gear to al-
low the gear to be pulled evenly into place. Torque cap
screws from 45 to 65 ft-lb (61 to 88 N−m) to secure as-
sembly (Fig. 50).
19.When
installing new differential bearings, reuse the
original shims or use new shims of the same thickness.
Press the new differential bearings onto the differential
case. If a new  differential case is being installed, start
with a 0.020 inch (0.50 mm) pack of shims under each
differential bearing (Fig. 51).
NOTE:  Shims are  available  in  0.003 in.  (0.08  mm),
0.005
(0.76
in. (0.13 mm), 0.010 in. (0.25 mm) and 0.030 in.
mm) thickness.
Groundsmaster 3280−D/3320
Page 8 − 27
Drive Axles
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 260 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website