Removal (Fig. 10)
Park machine on a level surface, lower cutting deck
9. Remove four (4) cap screws, flat washers and lock
nuts that secure fan shroud to radiator. Position fan
shroud away from the radiator.
1.
(or implement), stop engine, engage parking brake and
remove key from the ignition switch.
10.Support the radiator assembly before loosening
mounting fasteners.
2.
Open hood (see Traction Unit Operator’s Manual).
11.
Remove screws and flange nuts that secure radiator
to radiator support.
CAUTION
12.Carefully
pull radiator assembly from the machine.
Locate and retrieve radiator shim (item 31). Plug radia-
tor and hose openings to prevent contamination.
Do not open radiator cap or drain coolant if the
radiator or engine is hot. Pressurized, hot cool-
ant can escape and cause burns.
Installation (Fig. 10)
Ethylene−glycol antifreeze is poisonous. Dis-
pose of coolant properly, or store it in a properly
labeled container away from children and pets.
1.
dure.
Remove any plugs placed during the removal proce-
2.
Carefully position radiator assembly to the radiator
support. Place radiator shim (item 31) between radiator
and support. Secure radiator with screws and flange
nuts.
3.
tor’s Manual).
Drain coolant from radiator (see Traction Unit Opera-
4.
Operator’s Manual).
Remove screen from machine (see Traction Unit
3.
Position fan shroud to the radiator. Secure fan
shroud to radiator with four (4) cap screws, flat washers
and lock nuts. Make sure that a minimum of .250” (6.4
mm) clearance exists at all points between shroud and
fan.
CAUTION
4.
ting threads. Connect hydraulic hoses to radiator.
Apply hydraulic thread sealant to hydraulic hose fit-
Before opening hydraulic system, operate all
hydraulic controls to relieve system pressure
and avoid injury from pressurized hydraulic oil.
5.
6.
7.
Connect upper and lower radiator hoses.
Install coolant reservoir to bracket on fan shroud.
Connect overflow hose to radiator fill opening and
5.
Disconnect hydraulic hoses from radiator. Position
hoses away from radiator.
secure with hose clamp.
6.
Disconnect radiator hoses (upper and lower) from
the radiator.
8.
Make sure radiator drain plug is tight. Fill radiator
with coolant (see Traction Unit Operator’s Manual).
7.
Loosen hose clamp and remove overflow hose from
radiator fill opening.
9.
Install screen to machine (see Traction Unit Opera-
tor’s Manual).
8.
Remove coolant reservoir from bracket on fan
shroud.
10.Close
hood (see Traction Unit Operator’s Manual).
Groundsmaster 3320
Page 3 − 11
Gasoline Engine
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3280 D, Toro Groundsmaster 3320 |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)