11.
gear (see Special Tools). Remove nut, washer, flange
coupler and seal from the pinion shaft (Fig. 31).
Install differential gear holder to carrier to retain spur
4
5
6
1
7
8
2
3
Figure 31
1.
2.
3.
4.
Nut
Washer
Flange coupler
Seal
5.
Shim
6.
7.
8.
Outer bearing cone
Outer bearing cup
Bearing spacer
12.Position
the housing assembly on a suitable press.
Place a 1/8 inch (3 mm) piece of steel or a screwdriver
blade under the edge of the spur gear. This will prevent
the spur gear from cocking and possibly cracking the
housing (Fig. 32).
IMPORTANT: DO NOT allow the pinion shaft to drop
on the floor during removal as damage will result.
Carefully press drive pinion shaft from housing. When
the pinion is close to being pressed completely out of the
bearing, reach under the housing and catch the pinion
in your hand to prevent any damage to the pinion.
Figure 32
13.Removing
(Fig. 33).
the drive pinion releases the spur gear
14.Remove
oil seal from housing. Then remove the
bearing shim, outer pinion bearing cone and bearing
spacer from the housing (Fig. 31).
Figure 33
Drive Axles
Page 8 − 20
Groundsmaster 3280−D/3320
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3280 D, Toro Groundsmaster 3320 |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |