3.
4.
Drain coolant from radiator.
3. Carefully position radiator assembly to the radiator
support. Secure radiator with six (6) flange head screws
and flange nuts.
A. Slowly remove radiator cap from the radiator.
B. Place drain pan below the radiator drain plug lo-
cated on the bottom of the radiator. Loosen drain-
cock and allow coolant to drain from radiator.
4.
Position fan shroud to the radiator. Secure fan
shroud to radiator with four (4) cap screws, flat washers
and lock nuts. Make sure that a minimum of .250” (6.4
mm) clearance exists at all points between shroud and
fan.
Remove screen from machine (see Traction Unit
Operator’s Manual).
5.
Route hydraulic hoses through grommets in lower
radiator shield. Lubricate new o−rings and connect
hoses to oil cooler.
CAUTION
6.
with clamps.
Connect upper and lower radiator hoses and secure
Before opening hydraulic system, operate all
hydraulic controls to relieve system pressure
and avoid injury from pressurized hydraulic oil.
7. Connect overflow hose to radiator fill opening and
secure with hose clamp.
5.
and discard o−rings. Route hoses out of grommets in
lower radiator shield.
Disconnect hydraulic hoses from oil cooler. Locate
8.
with coolant (see Traction Unit Operator’s Manual).
Make sure radiator drain plug is tight. Fill radiator
9.
tor’s Manual).
Install screen to machine (see Traction Unit Opera-
6.
the radiator.
Disconnect radiator hoses (upper and lower) from
10.Lower
hood (see Traction Unit Operator’s Manual).
7.
Loosen hose clamp and remove overflow hose from
radiator fill opening.
8.
Remove four (4) cap screws, flat washers and lock
1
nuts that secure fan shroud to radiator. Position fan
shroud away from the radiator.
2
9.
Support the radiator assembly before loosening
mounting fasteners.
5
5
10.Remove
that secure radiator to radiator support.
six (6) flange head screws and flange nuts
6
4
11.
Carefully pull radiator assembly from the machine.
6
3
Plug radiator and hose openings to prevent contamina-
tion.
4
12.As
from radiator using Figures 6 and 7 as guides.
required, remove radiator shield and oil cooler
7
Installation (Fig. 6)
1.
diator using Figures 6 and 7 as guides.
If removed, install radiator shield and oil cooler to ra-
Figure 7
1.
2.
3.
4.
Radiator
5.
6.
7.
Lock washer
Hex nut
Hydraulic hose
Oil cooler
Hydraulic hose
O−ring
2.
dure.
Remove any plugs placed during the removal proce-
Groundsmaster 3280−D
Page 4 − 9
Diesel Engine
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3280 D, Toro Groundsmaster 3320 |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)