Toro 05138SL Rev A Service Manual Groundsmaster 3280 D 3320 Preface Publication

Removal (Fig. 32)
Park the  machine on  a level surface,  engage the
parkingbrake,lowerthecuttingdeck(orimplement)and
stop  the engine.  Remove  the  key  from the  ignition
switch.
Installation (Fig. 32)
1.
1.  Coat  new o--rings  lightly with  clean  hydraulic oil.
Install hydraulic fittings with new o--rings to the lift cylin-
der.
2.
Position lift cylinder to the frame with the barrel end
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the  General Precautions  for Removing  and
up.
3.
Slide cap  screw (item  2) through  lift cylinder  and
frame mounting holes.
4.
inder pin (item 10) through the lift cylinder and lift arm.
Align lift cylinder to lift arm mounting holes. Slide cyl-
CAUTION
5.
6.
Secure cylinder pin with cotter pin (item 9).
Operate all hydraulic controls to relieve system
pressure and avoid injury from pressurized hy-
draulic oil.
Remove caps and plugs  from disconnected hoses
and fittings.
7.
hydraulic fittings on lift cylinder. Tighten  hose connec-
tions.
Install new o--ring(s) and connect hydraulic hoses to
3.
derthatistoberemoved.Allowhosestodrainintoasuit-
able container. Remove and discard o--rings.
Disconnect hydraulic hoses from fittings in lift cylin-
8.
and adjust  as required  (see Traction Unit  Operator’s
Manual).
Check hydraulic  fluid level in reservoir  (front axle)
4.
to prevent contamination.
Putcaps or plugs on disconnected hoses andfittings
5.
(item 10). Pull cylinder pin from the lift cylinder and lift
arm.
Remove one cotter pin (item 9) from the cylinder pin
9.
Follow Hydraulic System Start--up procedures.
6.
Remove lock nut (item 11) from cap screw (item 2)
that retains lift cylinder to frame.
7.
Support liftcylinderandslidecapscrew(item2)from
the lift cylinder and frame.
8.
9.
Lower lift cylinder from the frame.
Remove hydraulic fittings  and o--rings from  the lift
cylinder as required. Discard o--rings.
Groundsmaster 3280--D/3320
Page 5 -- 41
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 260 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website