3.
ting, scoring and wear. Replace any worn or damaged
parts.
Inspect head,piston rodand piston for excessive pit-
4. Install piston onto the rod being careful not to dam-
age o--ring. Install lock nut onto the rod and tighten.
5.
Remove shaft from vise.
Assembly (Fig. 38)
IMPORTANT: Prevent damage when clamping the
barrel into a vise; clamp on the pivot end only. Do
not close vise enough to distort barrel.
1.
draulic oil. Install new seal and o--rings to the piston.
Install wiper, o--ring and seal to the gland.
Coat new seals, wiper and all o--rings lightly with hy-
6. Mount barrel in a vise so that the rod end tilts up
slightly.
IMPORTANT: Do not clamp vise jaws against piston
rod surface. Protect rod surface before mounting in
vise.
7.
coat of hydraulic oil. Slide piston, rod and gland assem-
bly into barrel being careful not to damage the seals.
Coat all internal steering cylinder parts with a light
2.
3.
Mount rod securely in a vise.
Coatrodlightlywithhydraulicoil.Slideglandontothe
8. Using a spanner wrench, secure gland in barrel.
shaft being careful not to damage the wiper, o--ring and
seal.
Groundsmaster 3280--D/3320
Page 5 -- 49
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 3280 D, Toro Groundsmaster 3320 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)