Removal
Installation
1.
decks, stop engine, engage parking brake, and remove
key from the ignition switch.
Park machine on a level surface, lower cutting
1. Positionwheelmotortobrakeassemblymakingsure
that arrows on the side of motor case point upward.
2.
Align splines on motor shaft and splined brake shaft.
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the General Precautions for Removing and
Slide motor into brake assembly.
3.
Secure motor to brake assembly with cap screws
and flat washers. Tighten cap screws from 75 to 85 ft--lb
(101 to 115 N--m).
3.
To prevent contamination of hydraulic system during
motor removal, thoroughly clean exterior of motor and
fittings.
4.
ports. Attach hydraulic hoses and tubes to wheel motor.
Remove plugs from hydraulic lines, fittings, and
NOTE: To ease reassembly, tag the hydraulic hoses to
show their correct position on the wheel motor.
5.
erator’s Manual).
Fillreservoir with hydraulic fluid asrequired (seeOp-
4.
motor. Put caps or plugs on hydraulic lines, fittings, and
ports to prevent contamination.
Disconnect hydraulic hoses and tubes from wheel
IMPORTANT: Before loosening fasteners, support
wheel motor to prevent motor fromfalling during re-
moval.
5.
Remove wheel motor using Figure 63 as a guide.
Groundsmaster 4100--D
Page 4 -- 81
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 4100 D |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)