Procedure for Counterbalance Pressure Test
Make sure hydraulic oil is at normal operating tem-
perature by operating the machine for approximately 10
minutes. Make sure the hydraulic tank is full.
C. To decrease pressure setting, turn the adjust-
mentscrew onthevalve inacounterclockwise direc-
tion. A 1/8 turn on the screw will make a measurable
change in counterbalance pressure.
1.
D. Tighten locknut to secure adjustment. After ad-
justment, recheck counterbalance pressure. Re-
adjust as needed.
2.
decks lowered and off. Make sure engine is off and the
parking brake is engaged. Remove console cover.
Park machine on a level surface with the cutting
9.
Disconnect pressure gauge from test port.
CAUTION
Prevent personal injury and/or damage to equip-
ment. Read all WARNINGS, CAUTIONS, and Pre-
cautions for Hydraulic Testing at the beginning
of this section.
4
3
3.
1:
Determine system charge pressure (see TEST NO.
Traction Circuit Charge Pressure in this chapter).
2
1
4.
Connect a 1000 PSI gauge to counterbalance test
port on manifold under console (Fig. 36).
5.
at idle speed. Check for hydraulic leakage and correct
before proceeding with test.
After installing pressure gauge, start engine and run
6.
RPM) with no load on the system. Do not engage the
cutting decks.
Operate the engine at full engine speed (2730 + 30
Figure 36
1.
2.
Counterbalance test port
Counterbalance valve
3.
4.
Locknut
Adjusting screw
GAUGE READING TO BE 225 PSI (17.3 bar) over
system charge pressure (e.g. if charge pressure is
250
PSI, counterbalance pressure should be 475
PSI).
7.
8.
Stop the engine. Record test results.
Adjustment of the counterbalance valve can be per-
formed as follows:
NOTE: Do not remove the valve from the hydraulic
manifold for adjustment.
A. Loosen locknut on counterbalance valve (Fig.
36).
B. To increase pressure setting, turn the adjust-
ment screw on the valve in a clockwise direction. A
1/8
turnonthescrewwillmakeameasurablechange
in counterbalance pressure.
Groundsmaster 4100--D
Page 4 -- 43
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 4100 D |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)