Toro 03116SL Rev E Service Manual Groundsmaster 4100 D Preface Publication

Procedure for Traction Circuit Reducing Valve (PR)
Pressure Test
1
1.
perature by operating the machine for approximately 10
minutes. Make sure the hydraulic tank is full.
Make sure hydraulic oil is at normal operating tem-
2.
decks lowered and off. Make sure engine is off and the
parking brake is engaged.
Park machine  on  a level  surface with  the cutting
2
CAUTION
Figure 40
1.
2.
2WD/4WD control manifold
Pressure test port
Prevent personal injury and/or damage to equip-
ment. Read all WARNINGS, CAUTIONS, and Pre-
cautions for Hydraulic Testing at the  beginning
of this section.
3.
control manifold under radiator (Fig. 40).
Connect a 1000 PSI gauge to test port on 2WD/4WD
4.
at idle speed. Check for hydraulic leakage and correct
before proceeding with test.
After installing pressure gauge, start engine and run
1
2
5.
Operate the engine at full engine speed (2730 + 30
RPM).
Figure 41
2.
6.
traction pedal in  the reverse direction. While pushing
Sitonseat,applybrakesfully,andslowlydepressthe
1.
Manifold: lower side
Reducing valve (PR)
traction pedal, look at pressure reading on gauge:
GAUGE READING TO BE 650 PSI (approximate).
7.
8.
front side of the 2WD/4WD  control manifold (Fig. 41).
Adjustment of this valve can be performed as follows:
Stop engine and record test results.
Pressurereducingvalve(PR)islocatedonthelower,
NOTE:  Do not  remove the  valve  from the  hydraulic
manifold for adjustment.
A.  To increase pressure setting, remove cap on re-
ducing valve and turn the adjustment socket on the
valve in a clockwise direction. A 1/8 turn on the sock-
et will make a measurable change in pressure set-
ting.
B.  To decrease pressure setting, remove cap on re-
ducing valve and turn the adjustment socket on the
valve in a counterclockwise direction. A 1/8 turn on
the socket will make a measurable change in pres-
sure setting.
C. Recheck  reducing valve  (PR) pressure  setting
and readjust as needed.
9.
Disconnect pressure gauge from test port.
Groundsmaster 4100--D
Page 4 -- 47
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 258 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website