Removal
1.
Park machine on a level surface, lower cutting deck,
stop engine, engage parking brake, and remove key
from the ignition switch.
3
2.
Remove hood using Figure 5 as a guide.
Installation
1.
Install hood using Figure 5 as a guide.
2
2.
Align hood to machine to allow correct operation of
hood latches and dust seals:
1
A. Place shim that is 3/8” to 7/16” (9.5 to 11.1 mm)
thick on top of frame (both RH and LH sides) near the
sides of oil cooler (Figs. 6 and 7).
Figure 6
3.
1.
2.
LH shim location
LH hood pivot
LH pivot bracket
B. Close hood so that it rests on shims and fasten
the hood latches.
C. Loosen hood pivots at frame to adjust vertical
placement of pivots. Re−tighten hood pivot fasten-
ers.
3
D. Loosen pivot brackets to allow hood latches to
pull hood against radiator support. Re−tighten pivot
bracket fasteners.
3.
After hood is assembled to machine, check for the
following:
A. Check that bulb seals are equally compressed at
all contact points with hood.
2
1
B. Hood should open and close without contacting
oil cooler hardware.
Figure 7
1.
2.
RH shim location
RH hood pivot
3.
RH pivot bracket
Groundsmaster 4100−D
Page 7 − 7
Chassis
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 4100 D |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)