Service and Repairs
NOTE: For more component repair information, see
the Kubota Workshop Manual, Diesel Engine, V2003−T
Series at the end of Chapter 3 − Kubota Diesel Engine.
Hydraulic Valve Solenoids
The hydraulic valve solenoids can be replaced without
opening the hydraulic system.
1.
valve solenoid electrical connector from wiring harness
(Fig. 49).
Make sure ignition switch is off. Disconnect hydraulic
1
2
2.
Remove nut that secures solenoid coil to valve.
Carefully slide coil from valve stem.
3.
Install new solenoid to valve.
A. Apply Loctite 242 or equivalent to threads on end
of valve stem before installing nut.
Figure 49
1.
2.
Manifold (LH deck shown)
Valve solenoid
B. Torque solenoid nut to specification identified in
Figure 50. Over−tightening may damage the sole-
noid or cause the valve to malfunction.
4.
Reconnect electrical connector to the solenoid.
3
50
(5.6
to 55 in−lb
to 6.2 N−m)
4
to 6 ft−lb
RIGHT
(5 to 8 N−m)
FRONT
2
50
(5.6
to 55 in−lb
to 6.2 N−m)
1
50
(5.6
to 55 in−lb
to 6.2 N−m)
4
Figure 50
1.
2.
LH wing deck solenoid
2WD/4WD manifold solenoid
3.
RH wing deck solenoid
4. Center deck solenoid
Groundsmaster 4100−D
Page 5 − 31
Electrical System
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 4100 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |