Toro 03116SL Rev E Service Manual Groundsmaster 4100 D Preface Publication

Blade Spindle
4
2
5
6
3
7
18
8
9
10
1
11
17
12
13
RIGHT
88
(119
to 108 ft−lb
to 146 N−m)
FRONT
14
15
16
Figure 12
1.
2.
3.
4.
5.
6.
Cutting deck
7.
8.
9.
10.  High driven spindle (1 used)
11.  Flat washer
Idler pulley (4 used)
Flat washer
Idler spacer
13.  Carriage screw
14.  Cutting blade
15.  Anti−scalp cup
16.  Blade bolt
17.  Flange nut
18.  Flange head screw
Drive spindle: single pulley (2 used)
Low driven spindle (3 used)
Drive spindle: double pulley (1 used)
Lock nut
Flat washer
12.  Cap screw
Removal (Fig. 12)
Park machine on a level surface, lower cutting deck,
5.  Remove  cutting blade,  anti−scalp cup,  and  blade
bolt from spindle to be serviced (see Operator’s Manu-
al).
1.
stop engine,  engage parking  brake, and  remove key
from the ignition switch.
6.  Remove spindle housing assembly from deck.
2.
motor from cutting  deck (see Cutting  Deck Motor Re-
moval in the Service and Repairs Section of Chapter 4
If drive spindle  is to be serviced, remove  hydraulic
A.  For driven spindle assemblies, remove eight (8)
flange  head  screws   with  lock  nuts  that   secure
spindle to deck.
spindle.
Hydraulic   Systems).  Position   motor  away   from
B.  For drive spindle assemblies, loosen and remove
four (4) flange head screws with lock nuts that secure
spindle to deck. Then,  remove four (4) cap screws
with washers that secure spindle and motor mount to
deck.
3.
erator’s Manual). Loosen idler pulley to release belt ten-
sion. Remove drive belt from spindle to be serviced.
Remove belt covers from top of cutting deck (see Op-
4.
Start the engine and raise the cutting deck. Stop en-
gine and remove key from the ignition switch. Latch or
block up the cutting deck so it cannot fall accidentally.
Cutting Deck
Page 8 − 14   Rev. C
Groundsmaster 4100−D
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 258 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website