Cutting Deck Link Service
Disassembly (Fig. 9)
2
7
1.
Press flange bushings from top of link.
1
5
2.
Remove retaining ring and press tapered stud with
spherical bearing and flange nut from link.
2
3.
Remove flange nut and press spherical bearing from
tapered stud.
6
Reassembly (Fig. 9)
4
1.
Install new spherical bearing onto tapered stud. Se-
cure bearing with flange nut. Torque nut from 30 to 40
ft−lb (41 to 54 N−m).
30
to 40 ft−lb
(41
to 54 N−m)
2.
Press tapered stud with spherical bearing and flange
3
nut into link. Secure spherical bearing into link with re-
taining ring.
Figure 9
1.
2.
3.
4.
Link
5.
6.
7.
Spherical bearing
Flange nut
Retaining ring
Flange bushing
Grease fitting
Tapered stud
3.
Press flange bushings into bore of link.
4.
If cap screw and jam nut were removed from rear
link, install cap screw to allow 1.625” (41.3 mm) between
the head of the screw and the side of the link (Fig. 10).
5.
After link is installed on deck, check distance be-
tween center deck blade and wing deck blade. Readjust
cap screw and jam nut if needed (see Wing Deck Ser-
vice in this Chapter).
1.625”
(41.3
mm)
1
2
3
Figure 10
1.
2.
Rear link
Cap screw
3.
Hex jam nut
Cutting Deck
Page 8 − 12
Groundsmaster 4100−D
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 4100 D |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)