Toro 03116SL Rev E Service Manual Groundsmaster 4100 D Preface Publication

Troubleshooting
There are a number of factors that can contribute to un-
satisfactory quality  of cut, some  of which may  be turf
conditions. Turf  conditions such  as excessive  thatch,
uneven ground conditions, “sponginess” or  attempting
to cut off too much grass height may not always be over-
come by adjusting the machine.
Remember that the  “effective” or actual height−of−cut
depends on cutting unit weight, tire pressures, hydraulic
counterbalance settings, and  turf conditions. Effective
height−of−cut will be different than the bench set height−
of−cut.
Factors That Can Affect Quality of Cut
Factor
Possible Problem/Correction
1.
Maximum governed engine speed.
Check maximum governed engine speed. Adjust
speed to specifications if necessary (see Chapter 3 −
Kubota Diesel Engine).
2.
Blade speed.
All deck blades should rotate at the same speed.
See items in Troubleshooting Section of Chapter 4 −
Hydraulic System.
3.
4.
Tire pressure.
Check air pressure of each tire including castor tires.
Adjust to pressures specified in Operator’s Manual.
Blade condition.
Sharpen blades if their cutting edges are dull or nicked.
Inspect blade sail for wear or damage. Replace blade if
needed.
5.
Mower housing condition.
Make sure that cutting chambers are in good condition.
Keep underside of deck clean. Debris buildup will
reduce cutting performance.
6.
7.
Height−of−cut.
Make sure all deck height−of−cut adjustments are the
same. Adjust deck as specified in the Operator’s
Manual.
Cutting deck alignment and ground following.
Check lift arms and cutting deck pivot linkages for
wear, damage, or binding. Also, inspect for bent or
damaged pivot shafts.
8.
9.
Roller and castor wheel condition.
Grass conditions.
All rollers and caster wheels should rotate freely.
Replace bearings if worn or damaged.
Mow when grass is dry for best cutting results. Also,
remove only 1” (2.5 cm) or 1/3 of the grass blade when
cutting.
Groundsmaster 4100−D
Page 8 − 3
Cutting Deck
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 258 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website