PTO Switch
The PTO switch is attached to the control console next
to the operator seat (Fig. 15).
The switch terminals are marked as shown in Figure 16.
The circuitry of the PTO switch is shown in the chart be-
low. With the use of a multimeter (ohms setting), the
switch functions may be tested to determine whether
continuity exists between the various terminals for each
position. Verify continuity between switch terminals.
2
NOTE: The PTO ENGAGE position requires lifting and
pushing the lever toward the switch keyway. The PTO
OFF position occurs when the lever is pushed opposite
the keyway.
1
Figure 15
1.
PTO switch
2.
Control console
SWITCH
POSITION
NORMAL
CIRCUITS
OTHER
CIRCUITS
PTO ENGAGE
CENTER (ON)
PTO OFF
1 + 2
1 + 2
4 + 5
NONE
NONE
2
5
1
NONE
4
BACK OF PTO SWITCH
Figure 16
Audio Alarm
The audio alarm for low engine oil pressure is attached
to the control console next to the operator seat.
4
3
IMPORTANT: Make sure to observe polarity on the
alarm terminals when testing. Damage to the alarm
may result from an improper connection.
1.
12VDC
Isolate alarm from the circuit. Correctly connect
source to the terminals (Fig. 17).
2
1
2.
the alarm. Reconnect alarm to the circuit.
Alarm should sound. Remove voltage source from
Figure 17
1.
2.
Alarm top view
Alarm bottom view
3.
4.
Positive (+) terminal
Negative (−) terminal
Groundsmaster 4100−D
Page 5 − 13
Electrical System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 4100 D |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)