Transmission Assembly (Fig. 39)
1
IMPORTANT: When assembling the transmission,
lubricate all transmission components with clean
hydraulic oil.
2
3
1.
Make sure that all transmission components are
thoroughly clean before assembling the transmission.
2.
Apply clean hydraulic oil to washers and swash plate
surfaces. Install washer onto each swash plate and
carefully install swash plates into transmission pump
housing.
Figure 67
1.
2.
Swash plate (2 used)
Washer
3.
Pump housing
3.
retaining ring. Lubricate new O–rings and install onto
side covers.
Press oil seal into both side covers and secure with
4.
Carefully slide side covers over trunnion shafts tak-
ing care to not damage seals. Secure both side covers
to transmission pump housing with three (3) socket
head screws. Torque screws from 78 to 95 in–lb (8.8 to
4
5
2
3
10.8
N–m).
1
Figure 68
1.
2.
3.
Side cover
O–ring
Pump housing
4.
5.
Retaining ring
Oil seal
5.
Install plugs into transmission pump housing. Torque
Lubricate new O–rings and install onto two (2) plugs.
plugs from 17 to 19 ft–lb (22 to 27 N–m).
2
3
1
Figure 69
1.
2.
Socket head plug
Hex plug
3.
Pump housing
Hydraulic System
Page 4 – 68
Groundsmaster 7200/7210
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 7200, Toro Groundsmaster 7210 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
My mower is a TORO 7210.
Start fuse defection. Why ?