Cutting Deck Removal and Installation
Removal
1.
in the fully raised position. Stop engine, engage park-
Park machine on a level surface with the cutting deck
4
ing brake and remove key from the ignition switch.
2
NOTE: When the cutting deck is in the raised position,
pull link torsion spring tension is reduced making it much
easier to disconnect pull links from machine.
2.
Disconnect pull link from each side of machine (Fig.
1):
1
3
CAUTION
Figure 1
Be careful when disconnecting the pull links.
The pull link torsion springs may cause some
rotation of pull links during the removal process.
1.
2.
Pull link (deck raised)
Shoulder screw
3.
4.
Retainer pin
Torsion spring
A. Remove shoulder screw that secures retainer pin
to carrier frame.
2
B. Carefully slide retainer pin from carrier frame and
pull link.
3.
Note location of HOC pin in HOC bracket for assem-
bly purposes (Fig. 2). Remove HOC pin from HOC
bracket.
4.
gine and remove key from the ignition switch.
Start engine and fully lower cutting deck. Stop en-
1
Figure 2
WARNING
1.
HOC pin
2.
HOC bracket
Do not start the engine and engage the PTO
switch when the PTO drive shaft is discon-
nected from the cutting deck. If the engine is
started and the PTO shaft is allowed to rotate,
serious personal injury and machine damage
could result. If the PTO drive shaft is discon-
nected from the cutting deck, remove fuse F1
2
(15
amp) from fuse block to prevent uninten-
tional engagement of the PTO clutch.
5.
clutch, remove fuse F1 (15 amp) from fuse block.
To prevent unintentional engagement of the PTO
3
1
Figure 3
1.
2.
Clevis pin
Deck lift chain
3.
Adjustment clevis
Cutting Deck
Page 7 – 6
Groundsmaster 7200/7210
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 7200, Toro Groundsmaster 7210 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
My mower is a TORO 7210.
Start fuse defection. Why ?