Removal (Fig. 31)
Park machine on a level surface, lower cutting deck
(or implement), stop engine, engage parking brake and
remove key from the ignition switch.
Installation (Fig. 31)
1.
1. Install all removed hood components using Figure
31 as a guide. If intake screen was removed from hood,
make sure that hood support, seal angle and prop rod
support are attached to hood before installing screen.
Secure screen to hood with screws and lock nuts.
Torque fasteners that secure screen from 35 to 45 in–lb
2.
3.
Unlatch and raise hood.
Remove hair pin cotter (item 6) from left side frame
(4.0
to 5.1 N–m).
rod.
2.
Check condition of all seals on frame and hood. Re-
4.
port from frame rods.
Slide hood to left side of machine to free hood sup-
place damaged or missing seals. Check that no gaps ex-
ist between hood components and machine frame. If
necessary, seal gaps with silicone caulk.
5.
Remove hood from machine.
3.
onto frame rods.
Position hood to machine and slide hood support
6.
31
If necessary, remove hood components using Figure
as a guide.
4.
6).
Secure hood to frame rods with hair pin cotter (item
Close and latch hood.
5.
Groundsmaster 7200/7210
Page 6 – 29
Chassis
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 7200, Toro Groundsmaster 7210 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
My mower is a TORO 7210.
Start fuse defection. Why ?