5.
splines of transmission input shaft and flywheel coupler.
Apply a generous amount of antiseize lubricant to
10.On both sides of machine, secure the pump control
rod to the traction control hub with cap screw and lock
nut (Fig. 36). Note that cap screw is installed from the
outside toward the center of the machine.
6.
Place two (2) dowel pins in flywheel housing.
IMPORTANT: Make sure to not damage the trans-
mission, flywheel housing, hydraulic lines, electri-
harness or other parts while installing
transmission.
11.
and fittings during the removal procedure.
Remove plugs that were installed to hydraulic hoses
cal
12.Using labels placed during the removal process,
properly connect hydraulic hoses to transmission, gear
pump and hydraulic tank fittings (see Hydraulic Hose
and Tube Installation in the General Information section
of this chapter).
CAUTION
Support transmission assembly when installing
it to the flywheel housing to prevent it from fal-
ling and causing personal injury.
13.Lubricate gasket of new oil filter and install filter on
transmission.
14.Make
sure that drain plugs are properly installed in
hydraulic tank and transmission. Fill hydraulic tank with
new hydraulic fluid.
7.
Lower transmission into machine. Align transmis-
sion input shaft with flywheel coupler and slide transmis-
sion to flywheel housing. Support transmission to
prevent it from shifting.
15.Install
operator seat and seat base (see Operator
Seat Installation in the Service and Repair section of
Chapter 6 – Chassis).
8.
Secure transmission to the flywheel housing with
seven (7) cap screws and lock washers. Make sure that
shorter cap screw is properly positioned. Torque cap
screws 400 in–lb (45 N–m).
16.Plug
valve coil and seat switch. Secure harness to frame.
wire harness electrical connectors to solenoid
17.Check
18.Adjust
parking brake and brake switch operation.
traction drive for neutral.
9.
Installation in this section).
Install hydraulic tank to machine (see Hydraulic Tank
Groundsmaster 7200/7210
Page 4 – 55
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 7200, Toro Groundsmaster 7210 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
My mower is a TORO 7210.
Start fuse defection. Why ?