9.
Install dowel pins in body.
IMPORTANT: When clamping the pump in a vise,
clamp only on mounting flange. DO NOT clamp
pump body in a vise.
IMPORTANT: Do not dislodge O–rings, pressure
seals or back–up rings during final assembly.
14.Clamp
shaft end down.
mounting flange of pump in a vise with the
10.Gently
marker lines for proper location. Firm hand pressure
should be sufficient to engage the dowel pins.
slide the back plate onto the assembly using
15.Alternately torque the socket head screws 220 in–lb
(25
N–m).
11.
Place thin sleeve or tape on pump shaft splines to
prevent seal damage.
16.If implement relief valve was removed from back
plate, install relief valve. Torque relief valve 220 in–lb
12.Position
the pump with back plate downwards. Care-
(25
N–m).
fully slide the front plate onto the assembly using marker
lines for proper location. Take care to not damage the
seal during front plate installation. Remove sleeve or
tape from shaft splines.
17.Put a small amount of hydraulic oil in inlet port of
pump and rotate input shaft one revolution. Place cou-
pler on input shaft and use pliers on coupler to rotate
pump shaft. If input shaft binds, disassemble pump and
repeat assembly process.
13.Install
the four (4) socket head screws with lock
washers and hand tighten.
18.Remove
pump from vise.
Hydraulic System
Page 4 – 82
Groundsmaster 7200/7210
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 7200, Toro Groundsmaster 7210 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
My mower is a TORO 7210.
Start fuse defection. Why ?