Removal (Fig. 8)
Park machine on a level surface, lower cutting unit
(or implement), stop engine, engage parking brake and
remove key from the ignition switch.
Installation (Fig. 8)
1.
1. Remove all plugs placed in radiator and coolant hose
openings during the removal procedure.
2.
3.
Carefully position radiator to the radiator frame.
Secure radiator to the radiator frame with four (4) cap
2.
Open hood and secure it in the raised position.
screws and flange nuts.
CAUTION
4.
Carefully position fan shroud to radiator taking care
to not damage fan. Secure fan shroud to the radiator
with four (4) screws and flat washers.
Do not open radiator cap or drain coolant if the
radiator or engine is hot. Pressurized, hot cool-
ant can escape and cause burns. Ethylene–gly-
col antifreeze is poisonous. Dispose of coolant
properly or store it in a properly labeled contain-
er away from children and pets.
5.
Make sure that equal clearance exists at all points
between fan shroud and fan.
A. To move fan shroud left or right, adjust location of
radiator in radiator frame.
3.
Place a suitable container under the left corner of the
radiator to collect the coolant. Remove plug (item 12)
(hex socket head) from bottom of the radiator and com-
pletely drain the radiator.
B. To move fan shroud up or down, adjust location of
shroud on radiator.
6.
Connect following hoses to the radiator:
A. Upper radiator hose to the water pump.
B. Lower radiator hose to the engine block.
C. Coolant hose to the expansion tank.
4.
Disconnect following hoses from the radiator:
A. Upper radiator hose to the water pump.
B. Lower radiator hose to the engine block.
C. Coolant hose to the expansion tank.
D. Air inlet hose to the air cleaner assembly.
Apply thread sealant to threads of radiator plug (item
D. Air inlet hose to the air cleaner assembly.
Remove four (4) screws and flat washers that secure
7.
5.
12). Install plug into radiator opening.
fan shroud to radiator. Carefully position fan shroud
away from radiator taking care to not damage fan.
8. Check that no gaps exist between radiator, radiator
frame and machine frame. If necessary, seal gaps with
silicone caulk.
6.
Remove four (4) cap screws and flange nuts secur-
ing the radiator to the radiator frame.
9.
Fill radiator with coolant. Make sure that expansion
7.
Carefully pull radiator from the radiator frame and
tank coolant level is correct.
machine.
10.Close
and latch hood.
8.
Plug radiator and hose openings to prevent contami-
nation.
Groundsmaster 7200/7210
Page 3 – 13
Kubota Diesel Engine
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 7200, Toro Groundsmaster 7210 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
My mower is a TORO 7210.
Start fuse defection. Why ?