Transmission Removal (Fig. 35)
1
WARNING
FRONT
Before disconnecting or performing any work on
the hydraulic system, all pressure in the system
must be relieved. See Relieving Hydraulic System
Pressure in the General Information section.
3
1.
Park machine on a level surface, lower cutting deck
(or implement), stop engine, engage parking brake and
remove key from the ignition switch.
5
4
6
2.
Seat Removal in the Service and Repair section of
Chapter 6 – Chassis).
Remove operator seat and seat base (see Operator
2
Figure 36
1.
2.
3.
Transmission
Pump control rod
Traction control hub
4.
5.
6.
Lock nut
3.
On both sides of machine, remove cap screw and
Cap screw
lock nut that secures the pump control rod to the traction
control hub (Fig. 36). Note that cap screw is installed
from the outside toward the center of the machine.
Retaining ring
7.
Label all hydraulic hoses and fittings for assembly
purposes. Remove hydraulic hoses from fittings on
transmission, gear pump and hydraulic tank. Allow
hoses to drain into a suitable container.
4.
mission solenoid valve coil. Position wire harness away
from transmission.
Unplug wire harness electrical connector from trans-
8.
vent system contamination.
Install clean plugs in hose and fitting openings to pre-
5.
6.
transmission, gear pump and hydraulic tank to prevent
hydraulic system contamination.
Drain oil from hydraulic tank and transmission.
Thoroughly clean hydraulic hose ends and fittings on
9.
al in this section).
Remove hydraulic tank (see Hydraulic Tank Remov-
5
6
5
7
4
1
RIGHT
3
FRONT
2
Figure 37
1.
2.
3.
LH wheel motor
Hydraulic tank
Gear pump
4.
5.
RH wheel motor
8mm threaded boss
6.
7.
Transmission
Flywheel housing
Groundsmaster 7200/7210
Page 4 – 53
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 7200, Toro Groundsmaster 7210 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
My mower is a TORO 7210.
Start fuse defection. Why ?