6.
Disconnect end yoke of PTO drive shaft from cutting
4. Start engine and fully raise cutting deck. Stop engine
and remove key from the ignition switch.
deck gearbox shaft (see PTO Drive Shaft Removal in
the Service and Repairs section of Chapter 6 – Chas-
sis). Position and support drive shaft end away from
deck gearbox.
CAUTION
7.
deck lift chains to adjustment clevises on cutting deck
(Fig. 3).
Remove four (4) ring pins and clevis pins that secure
Be careful when connecting the pull links to the
machine. The pull link torsion springs may cause
some rotation of pull links during installation.
8.
Slide cutting deck away from machine.
5.
tainer pin. Secure retainer pin to frame with shoulder
screw (Fig. 1).
Align pull link to carrier frame and attach link with re-
Installation
1.
Slide cutting deck under carrier frame of machine.
6.
height–of–cut (Fig. 2).
Install HOC pin into HOC bracket to allow desired
2.
Install four (4) clevis pins and ring pins to secure deck
lift chains to adjustment clevises on cutting deck (Fig. 3).
Connect end yoke of PTO drive shaft to cutting deck
7.
Install fuse F1 (15 amp) into fuse block.
3.
gearbox shaft (see PTO Drive Shaft Installation in the
Service and Repairs section of Chapter 6 – Chassis).
Groundsmaster 7200/7210
Page 7 – 7
Cutting Deck
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 7200, Toro Groundsmaster 7210 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
My mower is a TORO 7210.
Start fuse defection. Why ?