Toro 07150SL Groundsmaster 7200 7210 Service Manual

Removal (Fig. 109)
Installation (Fig. 109)
If hydraulic fittings were removed from lift cylinder, lu-
1.
WARNING
bricate and install new O–rings to fittings. Install fittings
into lift cylinder ports (see Hydraulic Fitting  Installation
in  the  General  Information  section  of  this  chapter).
Orientate fittings as noted during removal.
Before disconnecting or performing any work  on
the hydraulic system,  all pressure in  the system
must be relieved. See Relieving Hydraulic System
Pressure in the General Information section.
2.
3.
Position lift cylinder to the machine.
Secure cylinder barrel end to carrier frame with pivot
pin, screw and lock nut.
1.
Park machine on a level  surface, lower implement,
stop  engine, engage  parking brake  and  remove key
from the ignition switch.
4.
Secure cylinder  rod end  to  lift arm  with pivot  pin,
screw and lock nut.
2.
lift cylinder to prevent hydraulic system contamination.
Thoroughly clean hydraulic hose ends and fittings on
5.
Remove plugs that were installed in hydraulic hoses
during the  removal  procedure. Correctly  connect hy-
draulic hoses to lift cylinder fittings using labels placed
during  lift cylinder  removal (see  Hydraulic  Hose and
Tube Installation in the  General Information section of
this chapter).
3.
4.
draulic fittings on the lift  cylinder. Install clean plugs in
hose openings to prevent system contamination.
Label hydraulic hoses for assembly purposes.
Disconnect  hydraulic hoses  connected to  the  hy-
6.
Lubricate grease fittings on cylinder pivot pins.
5.
cylinder barrel end to carrier frame.
Remove lock nut, screw and pivot pin that secure lift
7.
essary.
Make sure hydraulic tank is full. Add correct oil if nec-
6.
Remove lock nut, screw and pivot pin that secure lift
cylinder rod end to lift arm.
7.
8.
der. Note orientation of fittings for assembly purposes.
Remove and discard O–rings from fittings.
Remove lift cylinder from machine.
If necessary, remove hydraulic fittings from lift cylin-
Groundsmaster 7200/7210
Page 4 – 97
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 226 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

One thought on “Toro 07150SL Groundsmaster 7200 7210 Service Manual

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website