Disassembly (Fig. 9)
Park machine on a level surface, lower cutting deck
1.
(or implement), stop engine and remove key from the
ignition switch.
2.
Remove front panel under the operator seat (Fig.
10).
3.
If removal of brake handle (item 12) is necessary:
A. On both sides of machine, unlatch spring pin from
brake linkage yoke. Remove spring pin from yoke
and brake handle brackets.
Figure 10
2.
B. Support brake handle to prevent it from shifting or
falling.
1.
Front panel
Washer head screw
C. Remove cap screws and lock nuts that secure
flange bearings to frame.
2
3
1
D. Remove brake handle and flange bearings from
machine.
4.
necessary using Figure 9 as a guide.
Remove additional parking brake components as
8.290”
to 8.350”
(21.1
to 21.2 cm)
Assembly (Fig. 9)
Figure 11
1.
2.
Front brake rod
Hex nut
3.
Brake linkage yoke
to 3.000”
to 7.6 cm)
1.
using Figure 9 as a guide.
Assemble parking brake components as necessary
A. If brake linkage yoke was removed from front
brake rod, install yoke onto rod so that center to cen-
ter length is from 8.290” to 8.350” (21.1 to 21.2 cm)
(Fig. 11).
2.880”
(7.4
3
3
B. Make sure that cap screws (item 10) used to se-
cure flange bearings (item 17) are installed from the
outside of the frame to the inside.
5
1
4
2
2.
After assembly of brake system, apply parking brake
and check length of compression spring on rear brake
rod. Spring length with brake applied should be from
Figure 12
2.880”
to 3.000” (7.4 to 7.6 cm) (Fig. 12). If necessary,
1.
2.
3.
Rear brake rod
4.
5.
Hex nut (2 used)
Swivel
Compression spring
Flat washer
adjust spring length with hex nuts on rear of brake rod.
3.
Check operation of parking brake and parking brake
switch.
4.
Install front panel to the machine (Fig. 10).
Groundsmaster 7200/7210
Page 6 – 13
Chassis
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 7200, Toro Groundsmaster 7210 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
My mower is a TORO 7210.
Start fuse defection. Why ?