5.
Remove cap screw and flat washer securing the
console shroud to the hydraulic tank. Remove both cap
screws and flat washers securing the console shroud to
the lower panel (Fig. 87).
6.
Remove three hex head screws and flat washers
securing the mounting plate (29) to the frame. Two
screwsarelocatedonthetopoftheplateatthefrontcor-
nersofthefueltank.Thethirdscrewisinfrontofthecas-
tor fork and below the plate.
PUMP INLET HOSE
7.
Tilt mounting plate (29) up by lifting at the rear of the
machine. Prop up plate securely. Remove four cap
screws (16) andflatwashers (12) securing thehydraulic
tank (6) to the mounting plate.
8.
(29).
Remove hydraulic tank (6) from the mounting plate
Figure 85
Inspecting Reservoir Parts (Fig. 84)
1
1.
2.
3.
4.
Clean tank and filler screen with solvent.
Inspect tank for leaks, cracks, or other damage.
Replace hydraulic hoses if worn or leaking.
Make sure cap screws are secure. If loose, remove
andreinstallcapscrewswith“Loctite242”orequivalent.
Make sure all bracket fasteners are tight.
Installing Hydraulic Reservoir (Fig. 84)
Place antiseize lubricant into all four inserts at the
WELDED
FITTING
5.
2
1.
bottom of the hydraulic tank (6). Position tank onto the
mounting plate (29).
Figure 86
2.
1.
Hose assembly
Case drain tube
2.
four cap screws (16) and flat washers (12). Torque cap
Secure hydraulic tank to the mounting plate with
1
4
3
screws from 30 to 60 in--lb (3.4 to 6.8 N--m).
3.
Secure mounting plate (29) to the frame with three
3
hex head screws andflatwashers Twoscrews goonthe
top of the plate at the front corners of the fuel tank. The
third screw goes in front of the castor fork and below the
plate.
2
5
4.
cap screw and flat washer, and to the lower panel with
both cap screws and flat washers (Fig. 87).
Secure console shroud to the hydraulic tank with
6
5.
Secure return hose (21) to hydraulic barb fitting (9)
with hose clamp (23).
Figure 87
6.
clamp (Fig. 85).
Secure pump inlet hose to hydrostat with hose
1.
2.
3.
Cap screw
Cap screw
Flat washer
4.
5.
6.
Console shroud
Hydraulic tank
Lower panel
7.
welded to the reel motor case drain tube located below
the right side of the frame (Fig. 86).
Connect hose assembly to the hydraulic fitting
Greensmaster 3250--D
Page 4 -- 117
Hydraulic System (Rev. I)
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 3250 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |