Bedbar Removal and Installation (Single Point Adjust Cutting Units)
Removal
2
1.
Remove rear roller (see Rear Roller Removal and
1
Installation).
2.
flange screw to the frame tab (Fig. 48).
Loosen both flange lock nuts securing the hex head
3
5
3.
Remove hex head flange screw (39), flat washer
and quad ring (37) from the bedbar (3) on the right
side of the unit (Fig. 42).
(38),
4
4.
Remove both pivot screws (30) from the pivot hous-
ing (28) and frame. Replace plastic bushings (31) if worn
or damaged (Fig. 42).
4
5.
Remove both lock nuts and flat washers from each
carriage screw securing the pivot hubs to the frame (Fig.
Figure 48
48
and 49).
1.
2.
3.
Flange lock nut
4.
Lock nuts & flat washer
Pivot hub (LH)
Hex head flange screw
Frame tab
5.
6.
(13
Remove carriage screws (18) from the pivot hubs
and 36) and frame. Remove bedbar (3) from the cut-
ting unit (Fig. 42).
7.
Remove both pivot hubs (13 and 36) from the bed-
bar (3). Replace bushings (10, 51, and 58) if they are
worn or damaged (Fig. 42).
Installation
1
1.
Apply antiseize lubricant to both bedbar pins. Tap
2
pivot hub (13) to the bedbar pin on the left side of the
bedbar (3) with a soft hammer. Tap pivot hub (36) to the
bedbar pin on the right side of the bedbar with a soft
hammer (Fig. 42).
2.
riage screws (18) through the frame and pivot hubs (13
and 36) on each side of the frame (Fig. 42).
Position bedbar (3) to the cutting unit. Insert car-
Figure 49
1.
Lock nut & flat washer
2.
Pivot hub (RH)
3.
Secure carriage screws with flat washers and lock
nuts (Fig. 48 and 49).
4.
Secure pivot housing (28) to the frame with both piv-
ot screws (30) (Fig. 42).
5.
Secure quad ring (37) and flat washer (38) to the
right bedbar pin with the hex head flange screw (39)
(Fig. 42).
6.
Reinstall rear roller (see Rear Roller Removal and
Installation).
7.
Adjust bedbar to reel, and tighten both flange lock
nuts securing the cap screw to the frame tab (see Adjust
Bedknife to Reel).
Greensmaster 3250−D
Page 7 − 27
SPA and 4−Bolt Cutting Units (Rev. A)
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 3250 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)