Disassembly (Fig. 12)
5
67
(91 to 112 N−m)
to 83 ft−lb
1
2
3
1.
Park machine on a level surface. Make sure engine
4
is off and brake is set.
2.
Remove center cutting unit from lift arm (see Opera-
tor’s Manual).
6
3.
Disassemble center lift arm as needed using Fig-
ures 12 and 13 as guides.
3
Assembly (Fig. 10)
1.
If lift frame (item 25) was removed from machine:
A. Adjust eccentric bushings (item 22) as needed
so that lift frame is level when the lift frame is in the
raised position.
B. Install thrust washers (item 12) as needed so
that lift frame is centered between the front wheel
mounts when the lift frame is in the raised position.
Figure 13
1.
2.
3.
Pull frame
Pivot spacer
Bushing
4.
5.
6.
Clevis
Cap screw
Lock nut
2.
guides.
Assemble center lift arm using Figures 12 and 13 as
A. If clevis (item 31) was removed from center lift
frame, torque cap screw from 67 to 83 ft−lb (91 to
112
N−m).
B. If pull frame (item 1 in Fig. 13) was removed from
clevis on lift frame, torque cap screw from 67 to 83
ft−lb (91 to 112 N−m).
3.
Attach cutting unit to lift arm (see Operator’s Manu-
al).
4.
Check that when raised to the transport position, the
cutting unit is secured by the transport plate. If neces-
sary, loosen two cap screws (item 30) and reposition
transport plate.
Greensmaster 3250−D
Page 6 − 15
Chassis (Rev D)
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 3250 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |