Toro 00062SL Rev I Greensmaster 3250 D Service Manual

Bearing Installation
2
1
1.
(Fig. 13):
Install new bearings  in both side plate assemblies
3
4
A.  Slide new  bearings into  non−drive side plates.
Position extended inner race of bearings toward cen-
ter of side plate housing.
B.  Press new bearings into drive side plates apply-
ing pressure to outer bearing race only. Position ex-
tended inner race of bearings toward center of side
plate housing.
5
C. Install  new seals  into side  plates. Note:   Seals
should be installed so the lip side of the seal will face
the center  of the  cutting  reel. When  bearings are
greased, grease will purge from inner seals.
Figure 14
1.
2.
3.
Socket head screw
Motor mount
4.
5.
Cutting unit
Lock nut (2 used)
Groomer side plate (RH)
2.
Install non−drive groomer side plate to cutting unit:
A.  Position non−drive groomer side plate to cutting
unit making  sure that groomer  arm lift rod  is posi-
tioned through bushing in side plate.
1
B.  Apply antiseize lubricant to threads of lift arm as-
sembly stud. Place spring washer and lock nut on lift
rod threads (Fig. 15). Tighten lock nut.
2
C. Position motor mount to groomer side plate (Fig.
3
14).
Secure motor mount and groomer side plate to
cutting unit with two (2) socket head screws and lock
nuts.
D. Install hydraulic reel motor to cutting unit (see Hy-
draulic Reel Motor Installation in the Service and Re-
pairs section  of Chapter Chapter  7.1 − Dual  Point
Adjust Cutting Units).
Figure 15
1.
2.
LH groomer side plate
Lock nut/spring washer
3.
LH groomer arm
3.
Install  groomer reel  and  drive  side groomer  side
plate (see Groomer Reel Installation in this section).
4.
Lubricate groomer bearings (see Groomer Reel Kit
Installation Instructions).
Note:
After   greasing   groomer   bearings,   operate
groomer for 30 seconds, stop machine and wipe excess
grease from groomer shaft and seals.
5.
Check and  adjust groomer reel  height and mower
height−of−cut settings.
Greensmaster 3250−D
Page 7.2 − 13
Groomer (DPA Cutting Unit) (Rev. D)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 308 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website