Toro 00062SL Rev I Greensmaster 3250 D Service Manual

Procedure for Gear Pump (P1) Flow Test
Make sure hydraulic oil is at normal operating tem-
CAUTION
1.
peraturebyoperatingthemachineforapproximatelyten
(10)
minutes.
Donotengagethecuttingunitswhenperforming
this test.
2.
Park machine  on a level  surface with  the cutting
units lowered. Make sure engine is off and the parking
brake is engaged. Make sure the hydraulic tank is full.
7.
50
Start engine and move throttle to full speed (2750 +
RPM).
8.
ing the flow control  valve on the tester until  2000 PSI
(138 bar) is obtained.
Watch pressure gauge carefully while slowly clos-
CAUTION
Before continuing further, read and  become fa-
miliar with Precautions for Hydraulic Testing.
9.
cord test results.
Flow indication should be 5.8 GPM minimum. Re-
3.
that leads to port P1 on the hydraulic manifold.
Ongearpump(P1)(reeldrive),disconnect    thehose
10.
11.
PSI (138 bar) cannot be obtained, check for restriction
in the pump intake line. If line is not restricted, remove
pump and repair or replace as necessary.
Open control valve on tester and shut off engine.
If flow was less than 5.8 GPM or a pressure of 2000
4.
Install tester with pressure gauge and flow meter in
series with gear pump (P1) and the disconnected hose.
Makesuretheflowcontrolvalveonthetesterisfully
open.
12.
pump and hose. Reconnect hose to the pump.
If testing is complete, disconnect  tester from gear
5.
sure backlap knob on the manifold block is in the mow
If a backlap  kit is installed on the  machine, make
position and reel speed is set to maximum.
6.
Make sure  tester load  valve is  fully open  before
starting the engine.
Greensmaster 3250--D
Page 4 -- 45
Hydraulic System (Rev. I)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 308 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website