Roller Service (Roller Shaft with Circlip)
4
v
1
2
3
6
5
Figure 26
1.
2.
Roller seal
Spiral retaining ring
3.
4.
Roller bearing
Rear roller body
5.
6.
Roller shaft
Front roller body
Seal Removal
.188
in. dia (2)
in. dia.
1.
Make a seal removal tool from a 1/4 x 3 x 3 in. (.63
.625
x 7.6 x 7.6 cm) piece of steel as shown (Fig. 27).
2.
3.
Slide seal removal over roller end of roller shaft.
Use the tool as a template to locate, mark, and drill
.625
.625
in.
in.
two 7/64 in. diameter holes in the outer face of the seal.
1/4−20
UNC (2)
4.
Thread two No. 8 x 3/4 in. long (.164 in. diameter)
self-tapping screws through the seal removal tool and
into the drilled holes in the seal.
1.05 in.
1.05 in.
5.
Thread two 1/4−20 x 1 in. long cap screws into the
Figure 27
seal removal tool.
6.
Alternately tighten the cap screws to pull the seal
from the roller body.
Note:
Seals will be destroyed during removal. Do not
re-use seals that have been removed from the roller.
Seal Installation
1.
Apply a thin film of clean oil to the inner lip of the seal
and slide the seal over the end of the roller shaft.
2.
Press the seal squarely into the roller body. The seal
face should be flush with the end of the roller body when
correctly installed.
Dual Point Adjust Cutting Units (Rev. D)
Page 7.1 − 22
Greensmaster 3250−D
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 3250 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |