Toro 00062SL Rev I Greensmaster 3250 D Service Manual

Adjust Attitude
There are four positions for the front roller brackets.
Position 1: Theleast aggressive position is used
for very soft and tender turf, or the highest height−
of−cut (Fig. 27).
Height−of−Cut (HOC) Range − 1/8  to 1−1/32 inch
(3.2
to 26mm)
Note:
The top  frame hole  and top  bracket hole  will
POSITION 1
yield Position 2 (standard position).
Figure 27
Position 2:   The standard  position  is  used for
most conditions (Fig. 28).
HOC Range − 3/32 to 15/16 inch (2.4 to 24mm)
Position 3: A more aggressive position is used on
firm turf (Fig. 29).
HOC Range − 3/32 to 13/16 inch (2.4 to 21mm)
POSITION 2
Figure 28
Position 4: The   most  aggressive   position  is
used  only  on very  firm  greens  or  at the  lowest
height−of−cut (Fig. 30).
HOC Range − 3/32 to 3/4 inch (2.4 to 19mm)
Note:
A more aggressive  setting will increase grass
removal and provide  a cleaner cut, but may  cause in-
creased scalping and marking.
POSITION 3
Note:
A more  aggressive setting will  be required  to
compensate for reel wear.
Figure 29
Adjusting Attitude
Note:
The top of the right front bracket  is secured to
the  frame with  an  eccentric bolt,  while  the  left front
bracket is secured with a shoulder bolt (Fig. 31).
1.
If the cutting  unit is not already removed  from the
machine, remove reel  motor from the cutting  unit and
cutting unit from lift arm (see Cutting Unit Removal and
Installation).
POSITION 4
Figure 30
2.
Remove lock nuts from the eccentric (shoulder) bolt
and carriage bolt securing both front brackets.
3.
Remove eccentric (shoulder) bolt and carriage bolt
from both front brackets and the side plates.
Greensmaster 3250−D
Page 7 − 13
SPA and 4−Bolt Cutting Units (Rev. A)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 308 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website