Adjustments
Adjust Transmission for Neutral
If the machine “creeps” when the traction control pedal
is in the neutral position, the neutral return mechanism
must be adjusted.
E. Fromeachsideofthebulkhead, tightenlocknuts
evenly, securing traction cable to the bulkhead. Do
not twist cable.
1.
Block up under the frame so one of the front wheels
Note:
If cable tension exists when in neutral, machine
may creep when the functional control lever is moved to
the Mow or Transport position.
is off the floor. If machine is equipped with 3 wheel drive
kit, raise and support rear wheel off the floor as well.
Chock wheels not being lifted to prevent the machine
from moving.
5
3
2.
wheel that is off shop floor; wheel must not be rotating.
Start engine, move throttle to SLOW and check
3.
If the raised wheel is rotating, stop engine and pro-
ceed as follows:
A. Loosen both jam nuts securing traction control
cable to bulkhead on hydrostat. Make sure jam nuts
areloosenedequallyandsufficientlytoallowadjust-
ment.
1
2
4
B. Loosen nut securing eccentric to the top of the
hydrostat.
Figure 22
1.
2.
3.
Traction control cable
Bulkhead
Jam nuts
4.
5.
Eccentric
Lock nut
C. Move functional control lever to neutral and
throttle to slow. Start engine.
D. Rotate eccentric until creep does not occur in ei-
ther direction. When the wheel stops rotating, tight-
en nut locking eccentric and adjustment. Verify
adjustment with throttle in SLOW and FAST posi-
tions.
Adjust Transport Speed
The traction pedal is adjusted for maximum transport
speed at the factory, but an adjustment may be required
if pedal reaches full stroke before it contacts pedal stop,
or if a decrease in transport speed is desired.
1
2
1.
tactsstopbeforetensionisfeltoncable.Ifanadjustment
is required:
Press down on traction pedal and see if pedal con-
A. Loosen flange head locknuts securing pedal
stop to floor plate.
B. Adjust pedal stop so it contacts pedal rod before
minimum tension is felt on the cable. Tighten nuts.
Figure 23
1.
Pedal stop
2.
Floor plate
Hydraulic System (Rev. I)
Page 4 -- 52
Greensmaster 3250--D
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 3250 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |