Toro 00062SL Rev I Greensmaster 3250 D Service Manual

Mow and Backlap (Serial Number Above 270000000)
The gear pump (P1) is directly coupled to the hydrostat
which is driven directly by the engine. Taking its suction
directly from the hydraulic reservoir, the gear pump (P1)
supplies oil flow to the hydraulic manifold block and to
the cutting reel motors. Maximum circuit pressure is lim-
ited by solenoid relief valve (S1R1) which is located in
the hydraulic manifold.
Oil flow from manifold port (P1) flows  through the reel
speed control valve (FC1). Flow across the speed con-
trolvalveispressurecompensatedbythelogiccartridge
valve (EP). The logic cartridge valve maintains a pres-
sure differential of  75 PSI (5.2 bar)  across the speed
control valve. Any excess flow above the speed control
valve setting is by--passed to the reservoir through the
logic cartridge valve. With the backlap valve (MR) in the
mow position, oil flows through the backlap valve, out
manifold port (MA), and to the reel motors that are con-
nected in series.  Oil flows through  the left (M2), right
(M3),andthenrearreelmotor(M1)asitturnsthemotors
in the mow direction.
With the engine running and the Functional Control and
Raise/Lower/Mow levers  positioned so  the reels   will
not turn (see Operator’s Manual), solenoid relief valve
(S1R1) in the hydraulic manifold is de--energized. The
de--energized (S1R1)  by--passes  flow from  the gear
pump (P1) to the oil filter and hydraulic reservoir. Addi-
tionally, manifold pressure reducing valve (PRV) will re-
main seated to prevent the reel motors (and reels) from
rotating.
When in the mow position, manifold pressure reducing
valve(PRV)willshiftallowingoiltoreturntothereservoir
through the manifold block and oil filter.
Mow
Backlap
With the engine running and the Functional Control and
Raise/Lower/Mow levers  positioned so  the reels   will
turn  (see  Operator’s  Manual),  solenoid  relief  valve
(S1R1)  is energized.  In  the energized  position,  this
valve directs oil flow to the  reel motors and also func-
tions as the mow circuit relief valve.
Backlapping operation is the  same as mowing opera-
tion, except for the position of the backlap valve (MR).
When the backlap valve (MR) is inthe backlap position,
oil flows through the rear (M1), right (M3), and then left
(M2) reel  motor as it  turns the motors  in the backlap
direction.
Greensmaster 3250--D
Page 4 -- 23
Hydraulic System (Rev. I)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 308 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website