Toro 00062SL Rev I Greensmaster 3250 D Service Manual

9
6
8
5
6
12
9
11
10
10
11
12
1
3
2
4
7
Figure 6
1.
2.
3.
4.
Hydraulic
_
motor
5.
6.
7.
8.
Hub
9.   Thrust washer
10. Washer
11.  Snap ring
12. Grease seal
45
Hydraulic fitting
Clutch roller bearing
Drive stud
Grease fitting
O−ring
O−ring
Disassembly (Fig. 6)
OUTER BEARING EDGE
MUST BE FLUSH WITH EDGE
1.
Remove grease seal (12) and  snap ring (12) from
the long end of hub (5).
2.
Remove washer (10), two  thrust washers (9), and
hub (5) from the hydraulic motor (1) shaft. Remove re-
maining two thrust washers (9), washer (10), snap ring
(11),
and grease seal (12) from the shaft.
3.
If drive studs (7) are bent or damaged, press studs
from the wheel hub (5).
ARROWS ON BEARING
TOWARDS LONG END
4.
Press clutch roller bearings (6) from the hub (5).
Assembly (Fig. 6)
Figure 7
1.
into the wheel hub (5).
If drive  studs (7) were removed,  press new studs
4.
Slide flat  washer (10) and  two thrust washers  (9)
onto the motor shaft. Slide hub (5) onto the shaft with the
short side first.
2.
Press roller clutch bearings (6)  into the hub (5) as
follows (Fig. 7):
5.
(10)
(11)
Slide remaining thrust washers (9) and flat washer
onto the  motor shaft. Install  remaining snap  ring
into the shaft  groove. Slide new grease  seal (12)
Note:
Arrow on the side  of the clutch roller bearings
(6)
must point to the long side of the end of the hub (5).
onto motor shaft.
A.  Press two bearings into each end of the hub.
IMPORTANT:The hub  (5) should spin  freely in  the
forward direction, but lock  on the hydraulic motor
B.  The outer edge  of the outer  bearings must be
flush with the recessed edge within the hub.
(1)
shaft when it is spun in the reverse direction.
6.
flush with the end of the hub.
Press grease seals (12) into the hub (5) so they are
C. Center  bearings must not interfere with grease
fitting hole.
3.
Grease inner edge of the new grease seal (12) with
No. 2 multipurpose lithium base grease. Slide seal onto
motor shaft past groove closest to the motor. Install snap
ring (11) into groove.
Chassis (Rev. D)
Page 6 − 8
Greensmaster 3250−D
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 308 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website