Toro 08159SL Groundsmaster 5900 5910 Service Manual

Procedure for Steering Circuit Relief Pressure Test
Make sure hydraulic oil is at normal operating tem-
1.
perature by operating the machine for approximately 10
minutes. Make sure the hydraulic tank is full.
1
2.
Park machine  on  a level  surface with  the cutting
decks lowered and off. Make sure engine is off and the
parking brake is applied.
CAUTION
Prevent personal injury and/or damage to equip-
ment. Read all WARNINGS, CAUTIONS and Pre-
cautions for Hydraulic Testing at the  beginning
of this section.
Figure 39
1.
Steering circuit pressure test port
3.
steeringcircuitpressuretestportGonthesteering/cool-
ing fan control manifold (Fig. 39).
Connect a 5000 PSI (350 Bar) pressure gauge onto
1
2
4.
at idle speed. Check for hydraulic leakage and correct
before proceeding with test.
After installing pressure gauge, start engine and run
5.
Operatetheengineatfullenginespeed    (2750RPM).
IMPORTANT: Hold steering  wheel at full lock  only
long  enough  to get  a  system  pressure  reading.
Holding the steering wheel against the stop for an
extended  period  may   damage  steering  compo-
nents.
Figure 40
1.
Steering/fan manifold
2.
Steering relief valve
6.
Turn steering all  the way in one direction  and mo-
mentarily hold the steering wheel against resistance.
GAUGE READING TO BE:
2000
to 2200 PSI (138 to 151 bar).
7.
Stop engine and record test results.
NOTE:  If steering relief  pressure is incorrect  and lift/
lower problems also  exist, gear pump (P3) should  be
suspected of  wear and  inefficiency. If steering  wheel
continues to  turn at end of  cylinder travel (with  lower
thannormaleffort),thesteeringcylinderorsteeringcon-
trol valve should be suspected of wear or damage.
8.
Ifreliefpressure  specification is notmet,adjustrelief
valve (RV) in steering/cooling fan control manifold (Fig.
so that pressure is correct (see Adjustable Pressure
Valve in the Adjustments section of this chapter).
40)
9.
Disconnect pressure gauge from manifold test port.
Groundsmaster 5900/5910
Page 4 -- 55
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 374 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website