CAUTION
1
Makesurethathoistorliftusedtoremoveengine
can properly support engine. Engine weighs
approximately 606 pounds (275 kg).
13.Connect
suitable hoist or lift to the front and rear lift
tabs on engine.
2
14.Remove
screwssecuringtheenginebracketstotheengineisola-
tor mounts.
lock nuts, snubbing washers and cap
Figure 35
1.
AC compressor
2.
Connector
CAUTION
2
1
One person should operate lift or hoist while the
other person guides the engine out of the ma-
chine.
IMPORTANT: Make sure to not damage the engine,
fuel lines, hydraulic lines, electrical harness or oth-
ermachinecomponents whileremoving theengine.
3
15.Carefully
raise engine from the machine.
16.If
necessary, remove engine mount brackets from
the engine.
Figure 36
17.If
from frame. Note that one of the fasteners for the RH
front motor mount also secures the frame ground cable.
necessary,remove engine isolator mounts (item 8)
1.
2.
Water separator
Outlet
3.
Fuel hose
4.
Connect suitable hoist or lift to the front and rear lift
18.Cover
orplugallengineopeningstopreventcontam-
tabs on engine.
inants from entering engine.
Engine Installation (Fig. 31)
CAUTION
1.
If removed, install engine mount brackets to engine
and isolator mounts to frame.
One person should operate lift or hoist while the
otherpersonguidestheengineintothemachine.
2.
Make sure that all parts removed from the engine
during maintenance or rebuilding are correctly installed
to the engine.
IMPORTANT: Make sure not to damage the engine,
fuel and hydraulic lines, electrical harness or other
parts while installing the engine.
3.
Remove all covers and plugs from engine openings
that were placed during engine removal.
5.
Slowly lower engine into the machine.
6.
mounts and secure with cap screws, snubbing washers
and lock nuts.
Align engine mount brackets to the engine isolator
CAUTION
Make sure that hoist or lift used to install engine
can properly support engine. Engine weighs
approximately 606 pounds (275 kg).
7.
Connect fuelhosetowater separator outlet(Fig.36).
8. Install hydraulic pump assembly to engine (see
Pump Assembly Installation in the Service and Repairs
section of Chapter 4 -- Hydraulic Systems).
Diesel Engine
Page 3 -- 38
Groundsmaster 5900/5910
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 5900, Toro Groundsmaster 5910 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)