6.
ifold, mark fitting orientation to allow correct assembly.
Remove fittings from manifold and discard O--rings.
If hydraulic fittings are to be removed from filter man-
106 to 159 in--lb
(12.0 to 17.9 N--m)
Installation (Figs. 82 and 83)
1
1.
If fittings were removed from manifold:
A. Lubricate new o--rings with clean hydraulic oil.
Install lubricated o--rings on fittings.
B. Installfittingsintomanifoldopenings usingmarks
made during the removal process to properly orien-
tate fittings.
4
C. Refer to Figure 82 for straight fitting installation
torque. For information on tightening procedures for
adjustable fittings, see Hydraulic Fitting Installation
in the General Information section of this chapter.
2
2.
Refer to Figure 82 for check valve and plug installa-
tion torque.
3
3.
Position filter manifold to the frame and secure with
four (4) flange head screws (Fig. 83). Torque screws
from 106 to 159 in--lb (12.0 to 17.9 N--m).
Figure 83
1.
2.
Flange screw (4 used)
Filter manifold
3.
4.
Oil filter
Main frame
4.
Remove caps and plugs from fittings and hoses.
Properly connect hydraulic lines to manifold (see Hy-
draulic Hose and Tube Installation in the General Infor-
mation section of this chapter).
5.
Makesurehydraulic tankisfull.Addcorrectoilifnec-
essary.
6.
Lower and secure hood.
Groundsmaster 5900/5910
Page 4 -- 111
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 5900, Toro Groundsmaster 5910 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)