Testing
The most effective method for isolating problems in the
hydraulic system is by using hydraulic test equipment
such as pressure gauges and flow meters in the circuits
during various operational checks (see the Special
Tools section in this Chapter).
WARNING
Before disconnecting or performing any work
on the hydraulic system, all pressure in the
system must be relieved and all rotating ma-
chine parts must be stopped. Stop engine;
lower or support attachments.
Before Performing Hydraulic Tests
IMPORTANT: All obvious areas such as oil supply,
filter, binding linkages, loose fasteners or improper
adjustmentsmustbecheckedbeforeassumingthat
ahydrauliccomponentisthesourceoftheproblem.
1.
Clean machine thoroughly before disconnecting or
disassembling any hydraulic components. Always keep
in mind the need for cleanliness when working on hy-
draulic equipment. Contamination will cause excessive
wear of hydraulic components.
Precautions for Hydraulic Testing
CAUTION
2.
open or exposed during testing or removal of compo-
nents.
Put metal caps or plugs on any hydraulic lines left
Failure to use gauges with recommended pres-
sure (PSI/bar) rating as listed in test procedures
couldresultindamagetothegaugeandpossible
personal injury from leaking hot oil.
3.
a phototac when performing a hydraulic test. Engine
speed can affect the accuracy of the tester readings.
Theenginemustbeingoodoperatingcondition.Use
4.
Theinletandtheoutlethosesfortesterwithpressure
CAUTION
and flow capabilities must be properly connected and
not reversed to prevent damage to the hydraulic tester
or components.
All testing should be performed by two (2)
people.Onepersonshouldbeintheseattooper-
ate the machine and the other should read and
record test results.
5.
When using hydraulic tester with pressure and flow
capabilities, open tester load valve completely before
starting the engine to minimize the possibility of damag-
ing components.
CAUTION
6. Install fittings finger tight and far enough to make
sure that they are not cross--threaded before tightening
them with a wrench.
Before opening the hydraulic system, operate all
hydraulic controls to relieve system pressure
and avoid injury from pressurized hydraulic oil.
See Relieving Hydraulic System Pressure in the
General Information section of this chapter.
7. Position tester hoses to prevent rotating machine
parts from contacting and damaging the hoses or tester.
8.
Check oil level in the hydraulic reservoir. After con-
necting test equipment, make sure tank is full.
9.
binding or broken parts.
Check control linkages for improper adjustment,
WARNING
Keepbodyandhandsawayfrompinholeleaks
or nozzles that eject hydraulic fluid under high
pressure. Do not use hands to search for
leaks; use paper or cardboard. Hydraulic fluid
escaping under pressure can have sufficient
force to penetrate the skin and cause serious
injury. If fluid is injected into the skin, it must
be surgically removed within a few hours by a
doctor familiar with this type of injury. Gan-
grene may result from such an injury.
10.After installing test gauges, run engine at low speed
and check for any hydraulic oil leaks.
11.
All hydraulic tests should be made with the hydraulic
oil at normal operating temperature.
12.Before
returning machine to use, make sure that hy-
draulic reservoir has correct fluid level. Also, check for
hydraulic leaks after test equipment has been removed
from hydraulic system.
Hydraulic System
Page 4 -- 38
Groundsmaster 5900/5910
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 5900, Toro Groundsmaster 5910 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)