Brake Disassembly (Fig. 7)
Scrapegasketmaterial(item10)frombrakehousing
1.
and planetary wheel drive mounting surfaces.
2.
Remove retaining ring (item 9) from brake housing.
3.
(3)
Remove four (4) stationary discs (item 7) and three
rotating discs (item 8).
2
4.
5.
Remove three (3) extension springs (item 12).
Remove actuator assembly (items 11, 6, 5, 4 and 3)
3
and balls (item 13).
6.
seal.
Remove seal (item 2) from brake housing. Discard
1
See text for
adjustment
procedure
Brake Inspection
Figure 8
1.
for wear or damage.
Wash parts in cleaning solvent. Inspect components
1.
2.
Brake assembly
Jam nut (2 used)
3.
Brake pull rod
2.
discs should have a minimum thickness of 0.440” (11.2
mm).
The stack of four (4) stationary and three (3) rotating
Brake Assembly (Fig. 7)
1.
installing new parts as necessary. Make sure to install
a new seal (item 2).
Reverse steps 2 through 6 to assemble brakes,
2.
Wheninstalling jamnutsontobrakepullrod,position
inner jam nut so that it is 0.120” (3.0 mm) from step in
brake pull rod (Fig. 8). From that point, loosen inner jam
nut 3 flats. While holding inner jam nut with a wrench,
install and tighten outer jam nut.
Groundsmaster 5900/5910
Page 6 -- 11
Axles, Planetaries and Brakes
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 5900, Toro Groundsmaster 5910 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)