Toro 08159SL Groundsmaster 5900 5910 Service Manual

4.
away from drive  belt to release belt  tension. Remove
drive belt(s) from deck pulleys.
Using appropriate  socket wrench, rotate  idler arm
WING DECK IDLER ARMS
6
1
7
5.
Insert nut driver or small piece of pipe onto the end
of the torsion spring for the idler arm.
2
3
CAUTION
4
Be careful when removing tension from the idler
arm torsion  spring. The spring  is under heavy
load and may cause personal injury.
4
3
5
6.
from the idler arm to unhook the spring from the arm.
Carefullypushthetorsionspringenddownandaway
1
6
7.
cutting deck.
Remove snap ring that retains idler arm assembly to
Figure 7
1.
2.
3.
4.
Screw
5.
6.
7.
Low idler arm
Lock nut
High idler arm
8.
6
lock nut  and screw as idler  assemblies are being  re-
moved (Figs. 6 and 7).
Remove idler components as needed using Figure
as a guide. Note location of  washer(s), idler spacer,
Flat washer
Idler pulley
Idler spacer
FRONT DECK
Installation (Fig. 6)
1.
a guide. Secure idler arm assembly to cutting deck with
snap ring.
Install removed idler components using Figure 6 as
3
1
2.
Insert nut driver or small piece of pipe onto the end
of the torsion spring for the idler arm.
CAUTION
0.100”
to 0.160”
Be careful when applying tension to the idler arm
torsion spring. The  spring is under heavy  load
and may cause personal injury.
(2.5 to 4.0 mm)
2
Figure 8
1.
2.
High idler arm
Stop bolt
3.
Jam nut
3.
the spring under the idler arm mounting plate. Then re-
lease the spring slowly to lock it into place.
Carefully push down on the torsion spring end to get
4.
Using appropriate socket wrench on idler arm to re-
lease drive belt  tension, position drive  belt(s) to deck
pulleys. Make sure  that idler pulley tensions the  back
side of the belt.
5.
On front deck,  make sure that  clearance between
high idler arm and stop bolt is from 0.100” to 0.160” (2.5
to 4.0 mm) (Fig. 8). If necessary, adjust jam nut location
on stop bolt to allow proper clearance.
6.
Install deck covers to cutting deck.
Groundsmaster 5900/5910
Page 8 -- 11
Cutting Decks
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 374 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website