Windshield Wiper/Washer Switch (Groundsmaster 5910)
The windshield wiper/washer switch is used to control
operation of the windshield wiper and washer pump.
The windshield wiper/washer switch is located in the
cab headliner (Fig. 83).
Testing
1.
ignition switch.
Make sure ignition switch is OFF. Remove key from
2
2.
3.
Remove switch plate from cab headliner.
Locate windshield wiper/washer switch and unplug
wire harness connector from switch.
1
4.
84.
The switch terminals are marked as shown in Figure
The circuit logic of the wiper/washer switch is shown
Figure 83
in the chart to the right. With the use of a multimeter
(ohmssetting),theswitchfunctionsmaybetestedtode-
termine whether continuity exists between the various
terminals for each position. Verify continuity between
switch terminals. Replace switch if testing identifies a
faulty switch.
1.
Cab headliner
2.
Wiper/washer switch
4
1
5
2
6
5.
Connect the harness connector to the switch after
testing.
6.
If switch tests correctly and circuit problem still ex-
3
ists, check wire harness (see Electrical Schematics and
Wire Harness Drawings in Chapter 10 -- Foldout Draw-
ings).
BACK OF SWITCH
Figure 84
7.
Install switch plate to cab headliner.
SWITCH
POSITION
CLOSED
CIRCUITS
OPEN
CIRCUITS
OFF
NONE
2 + 3
2 + 3
ALL
5 + 6
WIPER ON
WASHER ON
NONE
5
+ 6
Electrical System
Page 5 -- 46
Groundsmaster 5900/5910
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 5900, Toro Groundsmaster 5910 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |