3.
through lift arm and cylinder end. Secure pin with flange
head screw and flange nut.
Align lift cylinder with lift arm. Slide lift cylinder pin
4.
in the Service and Repairs section of Chapter 6 -- Axles,
Planetaries and Brakes). Lower machine to the ground.
Install front wheel assembly (see Wheel Installation
1
WARNING
Failure to maintain proper wheel lug nut torque
could result in failure or loss of wheel and may
result in personal injury.
5.
Torque wheel lug nuts evenly in a crossing pattern
from 70 to 90 ft--lb (95 to 122 N--m).
6.
Install cutting deck (see Cutting Deck Installation in
Chapter 8 -- Cutting Deck).
2
7.
8.
tingdecktoverifythathydraulichosesandfittingsdonot
contact anything.
Lubricate lift arm grease fittings.
3
4
5
Afterassemblyiscompleted,raiseandlowerthecut-
Figure 8
1.
2.
3.
Operator platform
Shim pad
Bumper pad
4.
5.
Flange head screw
Flange nut
9.
When lift arms are fully raised, check that gap be-
tween lift arms and bumper pads on bottom of operator
platform is approximately 0.100” (2.5 mm) (Fig. 8). If
necessary, add or remove shim pads so that gap is cor-
rect.
10.Verify
switch.
correct operation of front deck proximity
11.
Check height--of--cutand deck pitch adjustment. Ad-
just if necessary.
Chassis
Page 7 -- 10
Groundsmaster 5900/5910
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 5900, Toro Groundsmaster 5910 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)