Removal (Fig. 18)
Park machine on a level surface, lower cutting
decks, stop engine, apply parking brake and remove
key from the ignition switch.
3. Position and secure console arm assembly to seat.
Install all fasteners before fully tightening them.
1.
A. Secure support bracket (item 13) and support
channel (item 15) with flange nut (item 12) and car-
riage screw (item 16).
2.
Disconnect seat electrical connector from machine
wire harness.
B. Secure console armsupport(item18)tocoupling
nut with cap screw (item 19) and lock washer (item
20).
3.
Supportcontrolarmassemblytopreventitfromshift-
ing.
C. Place flat washer (item 2), seat belt buckle (item
4.
(item 16) that secure support bracket (item 13) to sup-
port channel (item 15).
Remove flange nut (item 12) and carriage screw
23)
and spacer (item 21) between seat and console
arm support (item 18) and secure with flat washer
(item 2) and cap screw (item 17). Torque cap screw
from 50 to 60 ft--lb (68 to 81 N--m).
5.
20)
pling nut (item 22).
Remove cap screw (item 19) and lock washer (item
that secure console arm support (item 18) to cou-
D. Fully tighten all fasteners to secure console arm
assembly to seat.
6.
(item 2), spacer (item 21) and seat belt buckle (item 23)
from seat and console arm support (item 18).
Remove cap screw (item 17), two (2) flat washers
4.
harness.
Connect seat electrical connector to machine wire
7.
Carefully move console arm assembly away from
seat.
8.
Remove four (4) Torx head screws (Fig. 19) that se-
1
cure seat to seat suspension. Note that the screw near
theseatadjustmenthandleislongerthantheotherthree
screws.
9.
Lift seat from seat suspension and remove from ma-
chine.
Installation (Fig. 18)
3
1.
2.
head screws (Fig. 19). Make sure that longer screw is
positioned near the seat adjustment handle. Torque
screws 18 ft--lb (25 N--m).
Carefully position seat to seat suspension.
Secure seat to seat suspension with four (4) Torx
4
2
18
(25
ft--lb
N--m)
Figure 19
1.
2.
Seat
Suspension assembly
3.
4.
Screw (M8x12) (3 used)
Screw (M8x16)
Groundsmaster 5900/5910
Page 7 -- 21
Chassis
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 5900, Toro Groundsmaster 5910 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)