Toro 10176SL Service Manual Models 30448 30446 Groundsmaster 4000 4010 D D Preface

Maintenance and Service
1.
decks, stop  engine, apply parking  brake and remove
key from the ignition switch.
Before  servicing   or  making  adjustments,   lower
12.Disconnect  battery before  servicing the  machine.
Disconnect negative cable first and positive cable last.
If battery voltage is required for troubleshooting or test
procedures,temporarilyconnectthebattery.Reconnect
positive cable first and negative cable last.
2.
keeping all nuts, bolts and screws tight.
Make sure machine is in safe operating condition by
13.Battery
Avoid contact with skin, eyes and clothing. Protect your
face, eyes and clothing when working with a battery.
acid  is poisonous  and  can  cause burns.
3.
wherethereisanopenflame,suchasnearawaterheat-
er or furnace.
Never store  the  machine or  fuel container  inside
14.Battery
and flames away from the battery.
gases can explode. Keep cigarettes, sparks
4.
hydraulic hoses and lines are in good condition before
applying pressure to the system.
Make sure all hydraulic connectors are tight and all
15.At the time of manufacture, the machine conformed
to the safety standards for riding mowers. To assure op-
timum performance and continued safety certification of
the machine, use genuine Toro replacement parts and
accessories.Replacementpartsandaccessories   made
by other manufacturers may result in non-conformance
with  the safety  standards  and the  warranty may  be
voided.
5.
Keepbodyandhandsawayfrompinholeleaksinhy-
draulic lines that eject high pressure hydraulic fluid. Use
cardboard or  paper to find  hydraulic leaks. Hydraulic
fluid escaping under pressure  can penetrate skin and
cause injury.  Fluid accidentally  injected into  the skin
must be surgically removed within a few hours by a doc-
tor familiar with this form of injury or gangrene may re-
sult.
16.When  changing  attachments, tires  or  performing
other  service, use  correct  blocks,  hoists  and jacks.
Make sure machine is parked  on a solid level surface
suchasaconcretefloor.Priortoraisingthemachine,re-
move any attachments that may interfere with the safe
and proper  raising of  the machine.  Always chock  or
block wheels. Use  appropriate jack stands to  support
the raised machine. If the machine is not properly sup-
ported by jack stands,  the machine may move or  fall,
which mayresultinpersonal  injury (seeJacking Instruc-
tions in this chapter).
6.
Before disconnecting or performing any work on the
hydraulic system,  all pressure in  system must  be re-
lieved by lowering cutting decks to the ground and stop-
ping engine.
7.
sired, contact an Authorized Toro Distributor.
If major repairs are ever needed or assistance is de-
8.
free of excessive grease, grass, leaves and dirt. Clean
protective screen on machine frequently.
To reduce  potential fire hazard,  keep engine area
17.When
welding on  machine, disconnect  all battery
cables to prevent damage to machine electronic equip-
ment. Disconnect negative battery cable first and posi-
tive cable last. Also, disconnect wire harness connector
from both of the TEC controllers and disconnect the ter-
minal  connector  from  the  alternator.  Attach  welder
ground cable no more than  two (2) feet (0.61 meters)
from the welding location.
9.
If engine must be running to perform maintenance or
an adjustment,  keep  hands, feet,  clothing and  other
parts of  the body away  from cutting decks  and other
moving parts. Keep bystanders away.
10.Do
setting.Toassuresafety  andaccuracy,checkmaximum
engine speed.
not overspeed the engine by changing governor
11.
Shut engine off before checking or adding oil to the
crankcase.
Safety
Page 1 -- 4
Groundsmaster 4000--D/4010--D
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 340 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website