Toro 10176SL Service Manual Models 30448 30446 Groundsmaster 4000 4010 D D Preface

Removal (Fig. 95)
Park  machine  on  a  level  surface,  lower  cutting
decks, stop  engine, apply parking  brake and remove
key from the ignition switch.
Installation (Fig. 95)
1.
1.  If fittings were removed from manifold, lubricate and
place new O--rings onto fittings. Install fittings into man-
ifold openings  using marks made  during the removal
process  to properly  orientate fittings.  Tighten fittings
(see Hydraulic Fitting Installation in  the General Infor-
mation section of this chapter).
2.
Raise and support operator seat to allow access to
fan drive manifold (Fig. 96).
3.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the  General Precautions  for Removing  and
2.
as a guide.
InstallfandrivemanifoldtotheframeusingFigure95
3.
Remove caps and plugs from fittings and hoses. Us-
4.
manifold removal, thoroughly clean exterior of fan drive
manifold and fittings.
To prevent contamination of hydraulic system during
inglabelsplacedduringmanifoldremoval,properlycon-
necthydrauliclinestomanifold(seeHydraulicHoseand
Tube Installation in the General Information section  of
this chapter).
5.
Label wire harness electrical connectors that attach
to manifold solenoid  valve coils. Disconnect wire har-
ness connectors from the solenoid coils.
4.
valve coils on the fan drive manifold.
Connect wire  harness connectors  to the  solenoid
6.
Disconnect hydraulic lines  from fan drive manifold
5.
essary before returning machine to service.
Makesurehydraulic  tankisfull.Addcorrectoilifnec-
and put caps or plugs  on open hydraulic lines and fit-
tings. Label disconnected hydraulic lines for proper re-
assembly.
6.  Lower and secure operator seat.
7.
Remove fan drive manifold from the frame usingFig-
ure 95 as a guide.
1
8.
If hydraulic fittings are to be removed from manifold,
mark fitting orientation  to allow correct assembly. Re-
move fittings from manifold and discard O--rings.
3
2
Figure 96
1.
2.
Fan drive manifold
Hydraulic reservoir
3.
Operator seat latch
Groundsmaster 4000--D/4010--D
Page 4 -- 125
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 340 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website