Toro 10176SL Service Manual Models 30448 30446 Groundsmaster 4000 4010 D D Preface

8.
(Fig. 13).
Disconnect fuel  supply  hose from  injection pump
IMPORTANT: The hydraulic pump assembly can re-
main in machine during engine removal. To prevent
pump from shifting or falling, make sure to support
pump assembly before mounting fasteners are re-
moved.
9.
Remove throttle cable fromengine (Figs.13and14):
A.  Remove lock nut that secures throttle cable swiv-
el to speed control lever.
14.Support
hydraulic pump assembly. Remove fasten-
ers that secure pump  assembly to engine (see Pump
Assembly Removal in the Service and Repairs section
of Chapter 4 -- Hydraulic System).
B.  Loosen cable clamp  and remove throttle cable
from under clamp.
C. Position throttle cable away from the engine.
10.Remove
fasteners that  secure  the upper  radiator
11
10
shroud to the lower shroud and radiator (see Radiator
Removal in this section). Position coolant reservoir and
bracket away from the radiator. Remove upper radiator
shroud from machine.
1
3
11.
15).
Remove cooling fan motor  and fan assembly (Fig.
9
8
6
A.  To prevent  contamination of  hydraulic system,
thoroughly clean exterior of fan motor and fittings.
4
7
5
B.  Disconnect hydraulic hoses from cooling fan mo-
tor.Putcaps  orplugs onfittings andhoses toprevent
contamination. Label hydraulic  lines for proper as-
sembly.
2
Figure 14
1.
2.
3.
4.
5.
6.
Lock nut
7.
8.
9.
10. Cable swivel
11. Cable stop
Cable clamp
Spring washer (2 used)
Lock nut
C. Remove six (6) cap screws and flange nuts that
secure fan motor bracket to radiator.
Throttle cable
Cable support
Lock nut
Washer head screw
Cap screw (2 used)
D. Carefully remove fan motor,fanand motor brack-
et assembly from machine.
12.Remove
transport cylinder  assembly from  engine
mount (Fig. 16). It is  not necessary to remove the hy-
draulic hose from thecylinder. Locate and remove cylin-
der spacer from between transport cylinder and engine
mount.
6
3
4
5
13.On
Groundsmaster 4010--D machines:
A.  Remove windshield washer reservoir from reser-
voir mount  on engine (Fig.  17). Position  reservoir
away from engine. Do not remove  reservoir mount
from engine.
1
B.  Remove air conditioning compressor from brack-
ets (see  Air Conditioning Compressor  Removal in
theServiceandRepairssectionofChapter9     -- Oper-
ator Cab). Position  compressor away from  engine
taking care  to not  damage compressor  or hoses.
Support compressor to make sure it will not fall dur-
ing engine removal.
2
Figure 15
1.
2.
3.
Fan
Fan motor bracket
Fan motor
4.
5.
6.
Cap screw (6 used)
Flange nut (6 used)
Radiator
C. Disconnect  coolant hose from  fitting on engine
water flange.
Kubota Diesel Engine
Page 3 -- 14
Groundsmaster 4000--D/4010--D
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 340 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website