IMPORTANT: Mark the relative positions of the gear
teeth and the bearing blocks so they can be re-
assembled in the same position. Do not touch the
gearsurfacesasresidueonhandsmaybecorrosive
to gear finish.
1
7.
ing block to remove the bearing block and gear set (Fig.
103).
Placethemotoronitssideandpushontherearbear-
8.
Carefully remove and discard O--rings, pressure
2
seals and back--up rings (Fig. 104) from motor. Do not
cause any damage to the machined grooves during the
removal process.
Figure 103
1.
Motor body
2.
Bearing block & gear set
IMPORTANT: Make sure not to damage the counter
bore when removing the shaft seal from the front
plate.
9.
move shaft seal taking care to not damage seal bore.
Position front flange with seal side up. Carefully re-
Inspection
1.
Remove any nicks and burrs from all motor compo-
nents with emery cloth.
CAUTION
Use eye protection such as goggles when using
compressed air.
Figure 104
2.
Clean all motor components with solvent. Dry all
parts with compressed air.
3.
Inspect drive gear, idler gear and bearing blocks
(Fig. 105) for the following:
1
A. Gear shafts should be free of rough surfaces and
excessive wear at bushing points and sealing areas.
Scoring, rough surfaces or wear on gear shafts indi-
cates need for replacement.
2
B. Gear teeth should be free of excessive scoring
and wear. Any broken or nicked gear teeth must be
replaced.
3
C. Inspect gear face edge for sharpness. Sharp
edges of gears will mill into bearing blocks and, thus,
must be replaced.
D. Bearing areas of bearing blocks should not have
excessive wear or scoring.
3
E. Face of bearing blocks that are in contact with
gears should be free of wear, roughness or scoring.
Figure 105
1.
2.
Drive gear
Idler gear
3.
Bearing block
4.
Inspect front flange, body and rear cover for damage
or wear.
Groundsmaster 4000--D/4010--D
Page 4 -- 131
Hydraulic System
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 10176SL, Toro Groundsmaster 30446, Toro Groundsmaster 30448, Toro Groundsmaster 4010 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |